雜志介紹

International Journal Of Refractory Metals & Hard Materials雜志介紹

《International Journal Of Refractory Metals & Hard Materials》是一本以English為主的未開放獲取國際優秀期刊，中文名稱國際難熔金屬與硬質材料雜志，本刊主要出版、報道材料科學-METALLURGY & METALLURGICAL ENGINEERING領域的研究動態以及在該領域取得的各方面的經驗和科研成果，介紹該領域有關本專業的最新進展，探討行業發展的思路和方法，以促進學術信息交流，提高行業發展。該刊已被國際權威數據庫SCIE收錄，為該領域相關學科的發展起到了良好的推動作用，也得到了本專業人員的廣泛認可。該刊最新影響因子為4.2，最新CiteScore 指數為7。

本刊近期中國學者發表的論文主要有：

• Monitoring the evolution of resistance-welded WC-10Co/B318 steel joint based on welding time

  Author: Chen, Lingyu; Zhang, Chong; Guo, Zhongning; Liu, Guoyue

• Square L12 precipitates inducing high susceptibility to adiabatic shear in 3D printed fine-grained tungsten heavy alloy with high-entropy alloy matrix

  Author: Zhang, Liuzhu; Li, Xiaolin; Zhu, Yichao; Wang, Benpeng; Liang, Yao-Jian; Xue, Yunfei; Wang, Lu

• Achieving high toughness and wear resistance for hard TaN-Ag films actuated by Ag

  Author: Li, Hang; Li, Jianliang; Kong, Jian; Huang, Jiewen; Wu, Qiujie; Xiong, Dangsheng

• Evolution of microstructure, mechanical and thermal properties with varied oxygen contents in TiAlON coatings

  Author: Zhang, Jie; Hu, Chun; Du, Jian W.; Chen, Li; Kong, Yi

英文介紹

International Journal Of Refractory Metals & Hard Materials雜志英文介紹

The International Journal of Refractory Metals and Hard Materials (IJRMHM) publishes original research articles concerned with all aspects of refractory metals and hard materials. Refractory metals are defined as metals with melting points higher than 1800 °C. These are tungsten, molybdenum, chromium, tantalum, niobium, hafnium, and rhenium, as well as many compounds and alloys based thereupon. Hard materials that are included in the scope of this journal are defined as materials with hardness values higher than 1000 kg/mm2, primarily intended for applications as manufacturing tools or wear resistant components in mechanical systems. Thus they encompass carbides, nitrides and borides of metals, and related compounds. A special focus of this journal is put on the family of hardmetals, which is also known as cemented tungsten carbide, and cermets which are based on titanium carbide and carbonitrides with or without a metal binder. Ceramics and superhard materials including diamond and cubic boron nitride may also be accepted provided the subject material is presented as hard materials as defined above.