雜志介紹

Canadian Journal Of Chemical Engineering雜志介紹

《Canadian Journal Of Chemical Engineering》是一本以Multi-Language為主的未開放獲取國際優秀期刊，中文名稱加拿大化學工程雜志，本刊主要出版、報道工程技術-ENGINEERING, CHEMICAL領域的研究動態以及在該領域取得的各方面的經驗和科研成果，介紹該領域有關本專業的最新進展，探討行業發展的思路和方法，以促進學術信息交流，提高行業發展。該刊已被國際權威數據庫SCIE收錄，為該領域相關學科的發展起到了良好的推動作用，也得到了本專業人員的廣泛認可。該刊最新影響因子為1.6，最新CiteScore 指數為3.6。

本刊近期中國學者發表的論文主要有：

• Suppressing the shuttle effect in lithium-sulphur batteries by defective single-walled ZnO nanotube: A DFT study

  Author: Zou, Jiaxuan; Cao, Yongan; Zhang, Bo; Wang, Wenju

• Numerical simulation on the larger concentration difference characteristics of dense granular jet in a coaxial gas stream

  Author: Zhou, Shengyu; Xu, Jianliang; Dai, Zhenghua; Liu, Haifeng

• Potassium transformation and release during biomass combustion

  Author: Deng, Lei; Jiang, Jiahao; Tie, Yuan; Ma, Shihao; Fan, Gaofeng; Zhu, Tao; Che, Defu

• Integrated operation optimization strategy for batch process based on process transfer model under disturbance

  Author: Chu, Fei; Wang, Jiachen; Wang, Yifeng; Chai, Guowei; Jia, Runda; Wang, Fuli

英文介紹

Canadian Journal Of Chemical Engineering雜志英文介紹

The Canadian Journal of Chemical Engineering (CJChE) publishes original research articles, new theoretical interpretation or experimental findings and critical reviews in the science or industrial practice of chemical and biochemical processes. Preference is given to papers having a clearly indicated scope and applicability in any of the following areas: Fluid mechanics, heat and mass transfer, multiphase flows, separations processes, thermodynamics, process systems engineering, reactors and reaction kinetics, catalysis, interfacial phenomena, electrochemical phenomena, bioengineering, minerals processing and natural products and environmental and energy engineering. Papers that merely describe or present a conventional or routine analysis of existing processes will not be considered.